Coffee automatic grinder, the bigger the scale, the finer the powder?-which is better for coffee bean grinder?

Coffee automatic grinder, the bigger the scale, the finer the powder?-which is better for coffee bean grinder?

At this point you need to decide whether to re-clean the coffee mill. In order to ensure the quality of coffee, if your debugging range is more than 2 scales, you need to thoroughly clean your bean grinder. Although we don't want to waste coffee, according to our experience, the effect is better after cleaning the bean grinder.

[analysis results]

If you get the results you want, congratulations! But remember, this is just the beginning. Ensuring the accuracy of the data in the test does not guarantee the perfect quality of your coffee, but it is still a shortcut for you to pursue the best quality of your coffee! If you successfully use this method to calculate the formula for one type of coffee, you can start testing the data needed to make other varieties of coffee, such as drip coffee. Then you will know which data are useful and which are not. Once you have the accurate data, when you taste the coffee again, you will know how to adjust the coffee mill according to taste. You can adjust the time of coffee extraction by controlling the thickness of the powder. A two-second gap will have a huge impact on the taste of coffee. So you can try to fine-tune the coffee mill to find the coffee that best suits your taste.

At the same time, don't be afraid to start from scratch. We have tried hundreds of times before coming to the above conclusion. So keep your motivation and dare to try, you can get the perfect result.

[record your results on a machine]

Under normal circumstances, in the peak period of use, the electronic bean grinder will have a little error, the error is about + /-0.5g. This usually happens to people who are used to testing the amount of powder by volume rather than weight.

Now all you need to do is enter the data into the bean grinder and let it record your exclusive recipe. But you still need to keep testing the accuracy of the bean grinder. If the machine is accurate enough, you don't need to make any more adjustments. But if the machine is not accurate enough, you need to set the machine data in detail and reduce the error to within + /-0.5g. The smaller the bean grinder, the more energy you need to adjust the machine, because the deviation is sometimes very large.