How to disassemble and clean the coffee machine nozzle--Introduction to cleaning and descaling steps

How to disassemble and wash the sprinkler of coffee maker-- A brief introduction to the steps of cleaning and descaling

1. 1. Coffee machine body cleaning:

2. Wipe the fuselage with a wet dishcloth before starting up every day. If you need to use a cleaner, please choose a mild and non-corrosive cleaner to spray it on the wet rag and then wipe the fuselage (note that the rag should not be too wet, and cleaning should not be sprayed directly on the fuselage to prevent excess water and detergent from seeping into the circuit system and eroding the wire to cause short circuit).

3. 2. Cleaning the outlet of the cooking head:

4. After each production, remove the handle and press the cleaning button to wash down the coffee grounds left in the cooking head and on the filter. Then insert the handle into the seat (note: do not insert the handle tightly at this time) press the cleaning key and shake the handle left and right to wash the cooking head washer and coffee grounds on the inside of the cooking head.

5. 3. Steam rods:

6. after using a steam stick to make milk foam, use a clean wet dishcloth (McEffin Coffee reminder: do not use coarse cloth! If the milk stain on the steam sprinkler has formed a hard lump, it can be soaked in water dissolving cleaning tablets for a period of time, then wipe it with a soft wet cloth) wipe and turn on the steam switch again, making use of the impulse and high temperature emitted by the steam itself. automatically clean the residual milk dirt in the vent to maintain the smooth flow of the vent If there is residual milk crystallization on the steam rod, soak the steam rod in a steel cup filled with 8% hot water to soften the crystallization in the jet hole and on the steam rod, remove the steel cup after 20 minutes, and repeat the operation in the first paragraph above.

7. 4. Boiler:

8. In order to prolong the service life of the boiler, if you do not use the machine for a long time, please turn off the power supply and turn on the steam switch to completely release the pressure in the boiler. After the boiler pressure gauge indicates zero, clean the water tray and drainage tank after the steam is no longer ejected (note: do not turn off the steam switch at this time, turn off the steam rod when hot water drips out the next day, in order to balance the internal and external pressure of the boiler)

A pot of water and two denture cleaners. Remember to dissolve the denture cleaner in another container, not in the water in the coffee pot. If the cleaning tablet is not dissolved, it will delay the cleaning time. [1]

Dissolve 30ml citric acid in four cups of hot water and add 4 cups of cold water to the mixture. [2]

Coffee maker cleaning tools bought in the store.

Bleach (used only on glass bottles) will immediately dissolve the roasted coffee. Do not mix bleach with vinegar or any other acid, or it will produce toxic fumes.

Do not use baking soda and warm water, this mixture can cause the coffee pot to clog and eventually break down! You can pour white vinegar into the coffee pot, and there is a 75% chance that it will solve the problem.

Put a layer of filter paper in the coffee pot as usual