Coffee review

How to clean the extraction part of Delong coffee machine S3200 stuck at the bottom

Published: 2024-09-08 Author: World Gafei
Last Updated: 2024/09/08, Delon coffee machine S3200 extraction part stuck in the bottom how to clean 1. Turn off the machine by pressing the power on key of the control panel. Note: do not unplug the power at this time, wait for all the lights to turn off 2. Open the outer cover of the extraction part of the coffee machine, take out the dripping plate and join the coffee grounds, and press the red release buttons on both sides of the extraction part to remove it. Note: extraction

How to clean the extraction part of Delong coffee machine S3200 stuck at the bottom

1. Turn off the machine by pressing the control panel power on key

two。 Open the outer cover of the extraction part of the coffee machine, take out the dripping plate and join the coffee grounds, and press the red release buttons on both sides of the extraction part to remove it. Note: the extraction part can only be removed when the machine is turned off. Forcibly removing the machine when the machine is turned on will damage the coffee machine >

3. Please clean the extraction part with clean water without preparation, do not wash it in the dishwasher, carefully clean the inside of the coffee machine, remove the coffee residue inside the machine, you can use a wooden or plastic fork for auxiliary cleaning, and you can also use a vacuum cleaner to absorb coffee residue.

4. After cleaning, when reinstalling, slide on the bracket to install the extraction part and press the "PUSH" key at the bottom until the clamping sound is heard. Then check to see if the red release button ejects correctly.

5. Install drip tray and coffee dregs container, then close the outer cover of the extraction part.

Three. Coffee maker milk container cleaning to follow the following steps:

1. Remove the milk tube and inlet tube.

two。 Pull out the foam milk regulator and clean the milk container and its top cover with a dishwasher or soapy liquid to make sure there is no milk residue in the two holes in the lid of the milk container pointed to by the arrow. Then plug back the entrance and milk tube.

0