What about moderate grinding with a hand grinder?-which is better with a hand coffee grinder?

What about moderate grinding with a hand grinder?-which is better with a hand coffee grinder?

1.1 applicable scenarios

Hand flushing, siphon kettle, pressure kettle and similar brewing methods at home are recommended to use a hand grinder. If you are doing Italian style,

Espresso is not recommended.

1.2 selection of grinding core

The movement of the hand bean grinder is divided into metal and ceramic. The metal gets hot when it is ground, allowing the aroma of coffee beans to evaporate ahead of time.

The ceramic is fragile, but the ceramic basically does not heat up, so the fragrance is corrected.

1.3 Brand introduction

Many people are using the affordable A12. Kyocera, HARIO and TIAMO are also good. HARIO is a fake Kyocera.

TIAMO copycat HARIO. The grinding core of HARIO is manufactured by Kyocera, the brand of TIAMO is made in Taiwan, almost all of them are made in the mainland, TIAMO

The plastic may not be safe. The grinding core of Kyocera CM45 can grind the powder needed by espresso, and the powder of espresso can be returned by personal feeling.

It's a special electric mill.

Japan Kyocera Kyocera CM-45CF: grinding is very hard, can be Italian, cleaning is very convenient.

AKIRA A Mel 13: cast iron core grinding, fine grinding point is considered uniform, rough grinding is not uniform.

PROLEX: it's quite popular these days. It's better to grind fine powder.

Because of its grinding disc characteristics, it is easy to grind unevenly.

It is easier to produce a large amount of heat, which aggravates the loss of coffee aroma, which also leads to the easy emission of coffee gas when the hand grinder is grinding.

The efficiency is too low, believe it or not, China Coffee Network believes anyway. This is the biggest problem for China Coffee Network. If I want to make a cup of coffee, if I use 20 grams of coffee beans to grind, the grinding time can be as long as 5 minutes. When shaking, your hands will still get sore. Of course, if you take this as a way of exercise, the hand grinder is quite suitable for you.

The wood base is easy to break, and the grinding plate above the hand bean grinder is fixed on the wood base with screws. After using it for a long time, the hole in the screw will become bigger and bigger, so that the bean grinder cannot be used. The solution is to remove the grinding part of the hand bean grinder, and then screw the screw to the base in another place.