What is the flavor of the milk from the coffee? describe the regional varieties produced by the method of taste treatment.

What is the flavor of the milk from the coffee? describe the regional varieties produced by the method of taste treatment.

1. Pour the milk into the milk bubble pot, the amount should not exceed 1 stroke 2 of the milk bubble pot, otherwise the milk will overflow due to expansion when making the milk bubble.

two。 Heat the milk to about 60 degrees, but not more than 70 degrees, otherwise the protein structure in the milk will be destroyed. Be careful! The lid and strainer cannot be heated directly. (for example, make ice foam to cool the milk below 5 degrees Celsius, of course, do not overfreeze and let the milk freeze.)

3. Put the lid and the filter on, and quickly twitch the filter to press the air into the milk. when you twitch, you don't need to press to the end, because you want to pump the air into the milk, so you can act on the surface of the milk; you don't need too many times. gently twitch about 30 times.

4. Remove the lid and strainer and scrape off the thick foam with a spoon, leaving dense hot (ice) foam.

Method 2: use steam foam to make milk foam.

Do not put the steam pipe into the milk, because there may be some condensed water in the steam pipe, so let off some steam in the front section and drain the excess water by the way.

Insert the thermometer into the container, then insert the steam pipe obliquely into the milk and turn on the steam switch.

Slowly adjust the position of the steam nozzle to a little bit from the surface of the milk, but never above the liquid level, or the milk will be spilled everywhere. A steady "hiss" will be heard when it is in the right position, otherwise it will be very loud or almost silent.

When the milk foam is sufficient, you can bury the steam pipe a little deeper and let the steam continue to heat the milk. The angle of the steam pipe had better be just enough to make the milk rotate.

On how to make a good milk bubble, here provides a stupid milk bubble method, that is, pour half of the milk into the steel cup, let the steam pipe and the milk perpendicular to the center or the edge of the steel cup, then let the steam head just touch the surface of the milk, then turn on the steam to 1pm 2, do not move the steel cup, slowly close when the milk reaches 50 degrees, close at 60 degrees, and finally the temperature will reach 66 degrees. In this way, you can make a good cup of milk foam. As we all know, the water is transparent, so you can see more clearly how the whirlpool is formed.

The second is to better master the number of holes in the play of different milk bubbles! Third, beginners should remember to use a thermometer when you fail to beat the milk foam into a thin shape, and the temperature cannot be better controlled, so the coffee you make is unstable. You may hit the milk foam once or twice out of ten times, but that is not a stable quality. I use my own local method to make milk foam, and it feels good. The appliance is the electric milk beater, 9.9RMB, which is bought by Yijia. Step: add fresh milk to the glass, heat it in the microwave oven for 45 seconds, stir in the milking machine for 1 minute, and the milk foam will become. I use a French press to filter out the 50ml coffee and pour it directly from the top of the foam. I can see that the coffee is gradually mixed with the milk, and the white foam rises slowly.