What if the water distribution network of Pegasus E98 coffee machine falls off-Pegasus E98 instruction manual

What if the water distribution network of Pegasus E98 coffee machine falls off-Pegasus E98 instruction manual

1. Use the handle of a spoon against the edge groove of the filter (do not use a sharp instrument) and pry down at different angles until the filter falls off. (the same method on the left and right)

two。 Put the filter screen, sealing ring and cannon handle into a clean slag tank, add 30 grams of special cleaning powder for coffee machine, then soak in 900 ml of boiling water for 20 minutes, then rinse with clean water.

3. After washing the filter screen, sealing ring and gun handle with clean water, put it into a clean slag tank, soak it with boiling water for one night, and install it on the brewing head the next day.

Note:

For the installation of the brewing head, put the sealing ring up on one side of the word, put it flat on the filter net, then put it into the handle strainer of the brewing head, and finally install the handle straight on the brewing head. (do not tilt, straight and hard to the top, counterclockwise needle rotation handle)

3. Basic troubleshooting methods of coffee machine

1. The machine has no power: 1. Whether the machine power switch is turned on or not. 1. Turn on the machine power switch. 2. Whether the power supply switch is on or not.

2. Check the power supply switch and find a professional if you want to.

3. Whether the power connection is correct or not. 3. Check the power connection

2, boiler water shortage: 1, external water supply is off 1, check external water supply 2, machine automatic water supply system is not turned on 2, turn on machine water filling system 3, filter blockage 3, replace filter element 4, pump motor card main 4, check pump 5, pump motor fuse 5, check fuse

1. One. Purge head cleaning

2. Do reflow first.

3 、 1. Press the coffee extraction button to rinse the coffee grounds off the brewing head and wipe it off with a towel.

4 、 2. Replace the filter screen of the brewing handle with a blind screen, and then add about 3 grams of special cleaning powder for the coffee machine.

5 、 3. Then install the brewing handle with cleaning powder on the brewing head.

6 、 4. Press and hold the fifth key, then press the first key until the two key lights are on, then release your fingers, and then enter the cleaning state. (there are five stages, the coffee machine automatically stops and goes into standby)

7 、 5. After cleaning, remove the brewing handle, rinse it clean, and then follow the fourth step to wash it again. (do not add powder this time)

Note: the left and right sides of the semi-automatic coffee machine are cleaned in the same way.

9. The second is the cleaning of the filter screen.

10 、 1. Use the handle of a spoon against the edge groove of the filter (do not use a sharp instrument) and pry down at different angles until the filter falls off. (the same method on the left and right)

11 、 2. Put the filter screen, sealing ring and cannon handle into a clean slag tank, add 30 grams of special cleaning powder for coffee machine, then soak in 900 ml of boiling water for 20 minutes, then rinse with clean water.

12 、 3. After washing the filter screen, sealing ring and gun handle with clean water, put it into a clean slag tank, soak it with boiling water for one night, and install it on the brewing head the next day.