Coffee review

Coffee Belgian pot usage brand ranking

Published: 2025-08-21 Author: World Gafei
Last Updated: 2025/08/21, Coffee Belgian pot use method brand ranking 1, pull out the catheter and filter cloth, unscrew the sealing plug. 2. add the right amount of water to the bucket, you can use heated water to complete the extraction process faster, otherwise the alcohol lamp will heat cold water very slowly, but do not use boiled water. The water should at least be added to the bucket to sink. 3. Add the right amount of coffee powder to the powder compartment, and then insert the catheter back into the bucket.

How to use Belgian coffee pot brand ranking

1. Pull out the catheter and filter cloth and unscrew the sealing plug.

2, add the right amount of water in the bucket, heated water can be used to complete the extraction process faster, otherwise the alcohol lamp will be very slow to boil cold water, but do not use boiled water. Water should be added at least until the bucket sinks.

3, add the right amount of coffee powder in the powder bin, and then insert the catheter back into the bucket and tighten the sealing plug.

4. Open the lamp cover of the alcohol lamp, buckle the lamp cover on the side of the bucket, and light the alcohol lamp.

Well, the whole operation process is so simple, the next thing to do is to wait for a cup of mellow coffee.

If you want a stronger cup of coffee, then you can hold the gravity ball with your hand when the water is squeezed into the powder bin on the left side, so that the alcohol lamp does not go out immediately. This can increase the strength of the coffee by extending the extraction time. The last thing to note is to remember to unscrew the seal before drinking, otherwise the coffee will not flow from the tap.

1. Remove the siphon first remove the filter cloth, filter cloth after cleaning with a clip bag, put into the refrigerator for the next use.

2. Gently tap the coffee grounds out of the glass (or use a dam or stir bar) and rinse with water. Rinse and dry with neutral dishwashing detergent and put back in place. 3. Remove the knob of the water filling port of the water container, turn on the tap and pour in clean water to wash until the water flowing out is clean.

4. The inside can not be wiped dry by shaking, and the outside can be wiped dry with a cloth. After confirming that the faucet is closed, put it back in place.

5. Clean and dry the siphon and put it back in place

6. Pour the remaining alcohol of the alcohol lamp back into the alcohol bottle, wipe the alcohol lamp holder clean and put it back in place

[Notes]

For safety reasons, pay attention to the following items when replenishing alcohol:

The alcohol lamp must be turned off to be replenished.

Try to replenish alcohol in the sink or in a place free of flammables, and wipe the outer ring after replenishment.

After use, make sure the water container is kept dry to avoid odor caused by humidity.

If the water container produces odor due to moisture, it can be soaked and cleaned with citric acid.

0