Nova coffee machine cleaning head Chinese instructions for the structure of the head

Nova coffee machine cleaning head Chinese instructions for the structure of the head

To wash the handle of the boil:

Remove the filter cup and brew handle and soak it in 500ml hot water with 5 grams of cleaning powder for 10 minutes. Clean and wipe dry the coffee dirt and coffee grounds on the handle with clean water.

If you find that the coffee machine is abnormal, please disconnect the power supply and water source in time, and inform the professional for inspection and maintenance.

[quarterly maintenance]

1. Gasket replacement:

If there is a leakage around the cooking handle during cooking, the rubber ring should be replaced.

The apron in the cooking head should be replaced quarterly. Avoid negative effects

(1) remove the drain pan and clean the sediment in the drain with a wet dishcloth, then rinse with hot water to keep the drain unobstructed; if the drainage is poor, pour a small tablespoon of coffee machine special cleaning powder into the drain, soak in hot water for five minutes to dissolve the coffee residue oil in the drainage pipe, and then clean it.

(2) if there is a leak at the bottom of the coffee machine, please check whether the drain is clogged. If it is blocked, clean the lower drain and drain.

4. External cleaning of coffee machine:

Wipe the outside of the fuselage with a clean wet rag every day, such as when wiping with a detergent, please choose a mild and non-corrosive cleaner to evenly penetrate and wipe the fuselage on a wet rag. The rag should not be too wet to prevent excess water and detergent from seeping into the circuit system and eroding the wire to cause a short circuit.

Note: machines, equipment and any accessories should not be scrubbed with iron wire, steel brushes and other hard tools.

1. Need a special reminder that the coffee machine must be cleaned regularly, generally speaking, in about a month. It can be adjusted according to the frequency used. When determining whether cleaning is needed, you can check the pressure of the steam, and clean it when the pressure of the steam is not ideal. two。 Try to choose professional detergent for cleaning, so that it will not cause damage to the machine, the decontamination effect is good, and it is relatively safe. 3. If there is no cleaning detergent, try mixing one part of white vinegar with six portions of clear water, which can also replace the professional detergent. Of course, you can also use citric acid, but the price is higher. 4. the effect of cleaning should be carefully observed, mainly to observe the color of the effluent and the pressure of the steam. If the effluent is clear and the pressure is in place, it will be cleaned. 5. If you encounter a steam outlet blockage, you can use a toothpick to clear it. What needs to be reminded is that be sure to turn off the steam switch before operating. Moreover, the steam outlet should not be directed at the person, so as to avoid accidental injury. 6. after the vinegar solution has achieved satisfactory results, rinse again with pure water until the water comes out without any peculiar smell.