Coffee review

Steps for the use of dripping pots in Vietnam-introduction to the requirements for grinding calibration

Published: 2024-11-03 Author: World Gafei
Last Updated: 2024/11/03, Methods and steps for the use of dripping pots in Vietnam-requirements for grinding calibration there are two mainstream methods of use in Vietnam. One is to put the coffee powder on the sieve and then inject water; the other is to put the coffee powder flat, first inject a small amount of water, so that the coffee powder is in full contact with the water and then screw on the sieve. The second method should pay attention to not too much water when injecting water for the first time.

Steps for the use of dripping pots in Vietnam-introduction to the requirements for grinding calibration

At present, there are two mainstream methods of using dripping pots in Vietnam. One is to put the coffee powder on the sieve and then inject water; the other is to put the coffee powder flat, first inject a small amount of water, so that the coffee powder is in full contact with the water and then screw on the sieve. The second method should pay attention to the amount of water not too much but evenly when injecting water for the first time, otherwise the coffee powder and water will quickly drop into the coffee cup, resulting in more residue in the coffee liquid. Its principle is similar to that of the first steaming of brewed coffee, where the coffee powder expands and is steamed in hot water, helping to extract evenly and efficiently. Lao Yang adopted the second method.

First, disassemble the Vietnam Didi pot and take out the screen inside.

Pour condensed milk into the coffee cup and set aside

Third, add the coffee powder to the drip pot and press it tightly, more than 10 grams per person.

Put the drip pot on the coffee cup and pour a small amount of hot water to soak the coffee powder but not drip it down. This step is also used in follicular coffee. The technical term "steaming" takes about 20 seconds.

After steaming for 5 or 20 seconds, screw on the sieve and pour in 95 °boiling water. The tightness of the sieve rotation will affect the extraction speed and coffee thickness. Usually, the tighter the spin, the longer the extraction time and the stronger the coffee. If the extraction is too slow after water injection, you can use the spoon handle as a screwdriver and loosen the sieve properly.

Six or three minutes later, after all the coffee is dripped into the coffee cup below, the condensed milk and coffee are mixed with a coffee spoon and a cup of unique Vietnamese coffee is extracted.

The use of Vietnamese coffee pots is still very simple, and it is rare to use Vietnamese Didi pots to extract coffee in Japan, where coffee is very popular, but in Vietnam, on the streets, every household can see ordinary Vietnamese using Vietnamese coffee Didi pots to slowly filter coffee.

0