How to investigate the grinding degree of manual bean grinder which brand is recommended by manual bean grinder

How to investigate the grinding degree of manual bean grinder which brand is recommended by manual bean grinder

1.1 applicable scenarios

Hand flushing, siphon kettle, pressure kettle and similar brewing methods at home are recommended to use a hand grinder. If you are doing Italian style,

Espresso is not recommended.

1.2 selection of grinding core

The movement of the hand bean grinder is divided into metal and ceramic. The metal gets hot when it is ground, allowing the aroma of coffee beans to evaporate ahead of time.

The ceramic is fragile, but the ceramic basically does not heat up, so the fragrance is corrected.

1.3 Brand introduction

Many people are using the affordable A12. Kyocera, HARIO and TIAMO are also good. HARIO is a fake Kyocera.

TIAMO copycat HARIO. The grinding core of HARIO is manufactured by Kyocera, the brand of TIAMO is made in Taiwan, almost all of them are made in the mainland, TIAMO

The plastic may not be safe. The grinding core of Kyocera CM45 can grind the powder needed by espresso, and the powder of espresso can be returned by personal feeling.

It's a special electric mill.

Japan Kyocera Kyocera CM-45CF: grinding is very hard, can be Italian, cleaning is very convenient.

AKIRA A Mel 13: cast iron core grinding, fine grinding point is considered uniform, rough grinding is not uniform.

PROLEX: it's quite popular these days. It's better to grind fine powder.

1.4 use skills

The hand grinder gives everyone the impression that it is very tiring to grind. At present, coffee beans are more popular in the domestic market for medium and deep roasting.

The son is still easy to grind. You can try sitting on a stool, clamping the bean grinder on your knee, and then grinding it. I usually use this square.

Law, it is very easy to say, and there is no need to press down hard.

1.5 Clean

After each use, try to clean the residual powder in the grinding core, bean warehouse, powder cartridge and powder cartridge. When it is not clean, you can wash the dishes.

Chi blew with her eyes closed. If you don't use it for a long time or for a long time, you can clean it with warm water again, if the grinding core is

Metal cannot be washed with water.

First, unscrew the top nut and remove the handle.

Second, you can see a nut that can rotate up and down. This is the principle of adjusting the thickness and "thick and thin". Adjust it several times and adjust it to the best condition.

Third, the fixed long piece, with the nut stuck, play a fixed role, and finally the handle, on the nut to be fixed. That's all right.