Cleaning steps of Merlot Coffee Machine Video-automatic cleaning of Merlot Coffee Machine

Cleaning steps of Merlot Coffee Machine Video-automatic cleaning of Merlot Coffee Machine

one。 Press the double cup button and the switch button for more than two seconds at the same time. At this point, the descaling icon flashes and the water tray icon lights up.

two。 Empty the water tray, then reinsert it, and the water tank icon lights up.

three。 Open the lid of the tank and pull the tank up until it is removed from the machine.

four。 Pour the detergent powder into a bowl filled with 0.5 liter of warm water, then stir the detergent powder. When the descaling powder is completely dissolved, pour the descaling solution into the water tank, and then re-insert the water tank.

five。 Press the coffee concentration button, start the integrated descaling program, run on the integrated descaling program card, the water flows through the coffee machine and flows into the water tray at multiple intervals, this process takes about 15 minutes, and then the water tray icon lights up.

six。 Empty the water tray, then reinsert it, and the water tank icon lights up.

seven。 Flush the water tank and fill it with tap water to the maximum scale.

eight。 Press the coffee concentration button and continue to run the integrated descaling program, where water flows out of the coffee outlet and flows through the coffee machine to the water tray, a process that takes about 5 minutes, and then the water tray icon lights up.

nine。 Empty the water tray and reinsert it. After a brief heat, the standby icon lights up, the machine is ready to run, and then insert the Merlot Claris water filter back into the water tank.

1. After buying it back, please read the manual carefully to see if the voltage matches, as well as some other precautions and operation instructions, so as to avoid improper operation causing damage to the body.

2. After installation, check whether the power cord is connected, whether there are signs of cracking or damage, so as to avoid electric shock, disinfect the kettle body with boiling water, remove dust, and use it cleanly.

3. The electric coffee pot can not be dry-fired, but do not add too much water, otherwise the water will overflow and wet the electric heating element after boiling. At the same time, do not splash water on the electrical parts of the kettle body when adding water, so as not to reduce the insulation performance.

4. As the new machines have the smell of plastic material, which is harmful to the human body, the electric coffee pot should boil two pots of boiling water before it is used for the first time to remove the bad smell.