Automatic coffee machine grinding thickness grinder dismantling and repairing numerical blockage

Automatic coffee machine grinding thickness grinder dismantling and repairing numerical blockage

Adjust the amount of water: the automatic coffee machine will also have the function of adjusting the amount of coffee cups. This function refers to increasing the amount of water in coffee to increase the amount of coffee. Accordingly, the concentration of coffee can be adjusted by adjusting the amount of coffee cups.

According to your usual pressure powder. In order not to destroy the just set amount of coffee powder, you need to use uniform strength when pressing the powder, so that the surface level of pressed powder, the overall pressure of pressed powder is moderate. No matter what method you use, you need to pay attention to the consistent method of pressing powder each time, so as to avoid the effect of making skills on the quality of coffee.

If you use a coffee cup with a scale, that's great. But you still need to measure the total weight of the coffee to better determine whether the grinder needs to be readjusted. If you use an automatic divider, the total weight of the coffee you make will have an error of about 3G. Since the scale on the cup can help you determine the liquid volume of coffee, you need to spend more energy on measuring the extraction time of coffee.

When you do this, most brands of bean grinders on the market will store 60g ground coffee powder. According to our experience, you need to store at least 100g of coffee powder in the bean grinder before you can start debugging the machine, and the debugging effect is more obvious. So, you need to make at least three more espresso before you start debugging the bean grinder, and when you're done, you have to make at least five or more cups of coffee. This is very important! The last thing you want to do is go back to work and retest and debug your machine.