Coffee review

Experience sharing of trial Evaluation of Alcohol fresh slow Bean Mill

Published: 2024-11-02 Author: World Gafei
Last Updated: 2024/11/02, Professional barista communication please follow the coffee workshop (Wechat official account cafe_style) because my friend gave me this bean grinder for a trial two days ago, so po learned that as for the detailed description of this bean grinder, I think some open-box articles are better than mine. Ceramic cutterhead: from the photos of the manufacturer, we can see that the blade of the ceramic cutterhead is actually not as sharp as the steel cutterhead, so I see the cutter head.

For professional baristas, please follow the coffee workshop (Wechat official account cafe_style)

Because my friend gave me this bean grinder to try out two days ago, so po had some experience.

As for the detailed description of this bean grinder, I think some open-box texts are better than mine.

1. Ceramic cutterhead: from the photos of the manufacturer, we can see that the blade of the ceramic cutterhead is actually not as sharp as the steel cutter head, so when I see the cutter head, I guess that the grinding bean is squeezed more than cut. Sure enough, from the state of the powder, we can see that it is more like a polygonal particle, which is closer to the state of ghost teeth, which is different from the general cone knife and flat knife. Try to cook and drink. Flavor trend is also the same, and ghost teeth close, the overall is more round rather than outward flavor, industry with the article, manufacturers compared the evenness, in the cup experience, although there is still a little distance with the little Fuji ghost teeth, the small Fuji body is more round, but actually a little bit amazing for me, because the price difference, can approach the little Fuji ghost teeth, is a good bean grinder. At the same price, I think it's a lot better than the flavor of the animal machine. I personally feel a little better than anonymity.

two。 Slow mill: this is the speed that the company boasts only 80rpm, which can avoid heat. Of course, this is a good thing for grinding beans, because the heat caused by high speed will cause the loss of aroma, especially the heat dissipation of ceramic cutter head is not as fast as steel cutter head, slow grinding is good. However, the relatively annoying place is to grind a portion of beans, which takes much longer than a bean grinder of the same class. I tested that 15g shallow baked beans have to be ground to 40 seconds, which is really a little long, so it is necessary to consider it for business use, but as a household machine, it doesn't matter, at least you don't have to work hard (look at the hand mill …... ).

3. Stability: in fact, this is what I am most worried about. Plastic is used in bean grinders, especially in the fixed parts of the cutter head. I actually have doubts about durability and stability, especially in some bean grinders that use plastic parts as the knife head holder. See the bad effect. But I opened it to see the moving part of the cutter head (the conical part), which is the driving place, so it is fixed. Below, the manufacturer actually made a circular vertebra design so that the cutter head can be stuck, so the upper and lower parts are fixed, and the stability increases a lot. in addition, although the lower seat is plastic parts, the manufacturer has designed six supports in plastic molding. and this support in the radial section is large, the support is very adequate (this is more troublesome in mold design, manufacturers have ideas) in fact, manufacturers have considered this point. Of course, compared with designs that are directly fixed by bearings (such as anonymity), durability must be considered, such as the wear and tear of the lower round vertebrae for a long time, will the gap become larger and cause the cutter head to shake? However, the hardness of ceramics is much higher than that of steel, which makes up for a lot. At this price, add other considerations (to disassemble and clean … Personally, I think this is a good design.

4. It is easy to disassemble, and the knife head can be completely removed and washed with water. it is really a good design for people with a penchant for cleanliness, and it can also be used to grind other things (such as sesame, peanuts and other nuts to make sesame butter and peanut butter), which can be cleaned after grinding. I'm not afraid of the smell remaining on the knife plate. The company is a Taiwanese manufacturer, and if it can order parts and facilitate disassembly and assembly in the future, consumers will not be afraid of the replacement of worn cutters or damaged parts.

5. It is small in size and weight, which is a little larger than anonymity, but it is much easier to carry than an animal machine, and the power can be powered by a car cigarette lighter, which is really convenient for people who want to drink coffee in a camping car.

6. Bad places: advantages and disadvantages, not good is that the grinding time is a little long, and the sound of grinding beans, the sound is actually not loud, but because the time drags on for a long time, will feel a little annoying. This is definitely not a problem at home, but if you bring it to the company, you can't use it secretly. You have to find a teahouse to grind it slowly, or a company with tea time will not attract people's attention. Of course, if it is supported by the company, it will not attract people's attention. It doesn't matter if the voice is a little louder or a little longer. Besides, business is not very suitable. Again, be careful when disassembling, ceramic cutter head, although the hardness is high, but also relatively brittle, the most fear is to fall. Finally, if you want to be better, of course there are parts that can be improved, but at this price, as well as practicality, portability and other considerations, I think the manufacturer has an intention in the design, it is a very good design.

Ask netizens to add the rest.

0