How to clean the brewing system of F1 series coffee machine?

After making coffee with F1 coffee machine, remove handle and press manual water outlet switch to flush coffee grounds remaining on filter screen, then insert handle into base, press manual water outlet switch and shake handle left and right to rinse handle base washer and coffee grounds inside.

I. Backwash the outlet of the coffee maker's cooking head before starting up each day.

1. Remove the copper sheet and strainer from the outlet.

2. Place the backwashing silicon wafer in the filter cup, then fill it with about 2-3 g of cleaning powder, and then insert the handle into the base to check whether it is completely tight.

3. Press the manual water outlet switch for about 4 seconds and then turn on and off. Repeat this for several times and then release the handle. Press the manual water outlet button and shake the handle left and right to wash the washer of the cooking head and the inside of the cooking head until the water in the filter cup becomes clean and colorless.

4. After cleaning, remove the handle, press the manual water key to make the residual cleaning powder in the brewing system flow out for about 1 minute before closing.

II. Rinse the copper sheet and filter net in the outlet with clean water and wipe them with a rag, do not wipe them with vegetable melon cloth.

III. If it cannot be wiped clean, soak the copper sheet and filter screen in the water outlet into the cleaning solution for one night, and install all accessories before shutting down the next day.

The cleaning method of the F1 coffee machine series brewing system I talked about here, here I call for the protection of their own machine, so that the use cycle is longer, so that they can also produce better quality coffee.