Introduction to the structure diagram and growth process of coffee bean structure roaster
The harvested coffee berries need further treatment, usually in two ways.
One is water washing, which is popular in Central America and parts of Africa; freshly harvested coffee berries separate the peel from the beans manually or mechanically, and then soak in water for 2 to 3 days. In this way, the pulp and sticky matter attached to the coffee beans will be removed. Then comes the cleaning and drying process, which can be done in the natural sun or by machine.
One is: solarization, which is more economical in Brazil and most African countries. After removing twigs and other debris, the coffee berries are spread out in the sun for 2 to 3 weeks, turning repeatedly to make the berries drier until the berries fall off the coffee beans.
When the water content of the coffee beans is reduced to about 13%, the coffee beans will be bagged and cooked in the warehouse for 1 to 3 months.
1. Picking
It is divided into mechanical picking and manual picking. Mechanical picking is suitable for coffee gardens with flat land and large areas of planting. Brazil is the most frequent user of mechanical picking coffee in the world. This method is characterized by low cost and high efficiency, but the coffee beans picked are uneven and of poor quality. For coffee beans with higher quality requirements, the method of manual picking is generally adopted, which ensures that the picked coffee fruit has uniform size, similar maturity, no other impurities, and is beneficial to the post-processing of coffee beans.
2. From fruit to coffee beans:
The processing methods from coffee fruit to coffee beans can be roughly classified as dry processing and wet processing, as well as dense processing.
Dry processing (solarization): the coffee fruit is dried and dehydrated by natural conditions such as sunlight and ventilation, and then the dried coffee fruit is shelled to remove pulp, peel and silver peel. This method is the most economical and traditional processing method, the coffee beans treated by this method can maintain the fragrance for a long time, but also have a certain environmental smell. At present, this method is widely used in many parts of Africa and Asian countries, but with the progress of science and technology, many places have begun to use dryers to dry coffee fruit.
Wet processing (washing): also known as washing processing, the coffee fruit is screened by soaking, and then the selected fruit is fermented and squeezed to remove the sticky pulp on the surface of the peel, pulp and silver skin. the processed coffee beans will retain the silver skin on the surface for storage, and the coffee beans in this state are called "parchment coffee beans" (Parchment Coffee). Wait until before the exit to remove the dried silver skin with a peeling machine. The biggest advantage of wet processing is that the appearance quality of coffee beans is good, and the original flavor is maintained well. The disadvantage is that the processing cost is high and a lot of water is needed. It is generally used for the processing of high quality coffee beans.
Honey treatment: honey treatment, called HoneyProcess or MielProcess, is the method of peeling off the pulp and drying the fruit with endocarp.
Transport
Before starting baking
First of all, we have to pick raw beans before we start baking-the selection of raw beans is also very important, and defective beans will affect the flavor of the coffee.
We need to pick out all black beans / partial black beans, sour beans / local sour beans, mold-damaged beans, moth-eaten beans, immature beans, withered beans, shell beans, broken beans, and other foreign objects (non-coffee impurities, including branches, stones, copper, etc.).
- Prev
Introduction to the structure diagram and growth process of coffee bean structure roaster
The harvested coffee berries need further treatment, usually in two ways. Then there is the Qing Dynasty.
- Next
Brazilian yellow bourbon coffee beans quality characteristics varieties brand flavor taste roast degree introduction
Coffee was first introduced to Brazil in the early 18th century. In 1727, the Brazilian government sent a handsome army officer to secretly bring coffee seeds back to Brazil from French Guiana on the grounds of mediating border disputes. It is said that the wife of the governor of French Guiana was deeply fascinated by this officer, so she secretly sent coffee seeds to him in a bouquet at a farewell dinner.
Related
- What is the Philharmonic pressure? How to use Philharmonic pressure to make delicious coffee
- Why does a hand grinder have more fine powder than an electric grinder?
- In addition to the hot mom, what is the difference between the versions of EK43 | ditting and Mahdi ek43?
- What kind of equipment do you need to make coffee by hand? Introduction to novice starter cooking equipment tools
- Espresso needs to be ground how thick and thin scale entry Italian Coffee Machine Bean Grinder investigation and Grinding course
- How much does it cost to open a small private cafe? How much does it cost to learn coffee? How to operate it?
- The difference between the flavor characteristics of hand-brewed coffee and coffee maker is hand-brewed coffee really better than coffee maker? Can I use a coffee machine to make coffee beans by hand?
- The difference between 01 and 02 of hario v60 filter cup what is the difference between 01 and 02 filter cup opening and cooking flavor
- What's the difference between the smart cup and the French kettle? Which is better, the French kettle or the Smart Cup?
- What's the difference between a smart cup and a V60 filter cup? The difference between the taste of smart cup and hand-brewed coffee