Hand grinder adjustment direction-coffee machine which brand is better

Hand bean grinder adjust direction-which brand of coffee machine is better?

The hand mill has different structures, which are divided into fixed shaft and unfixed shaft, and the products are very different. It's not fixed and uneven, but in a single product,

Different levels can be found.

A good fixed shaft hand mill can do Italian grinding, such as HG-ONE,PHAROS,ROSCO, while HARIO 1B is fixed.

If the shaft fails, the product is uneven.

After each use, try to clean the residual powder in the grinding core, bean warehouse, powder cartridge and powder cartridge. When it is not clean, you can wash the dishes.

Chi blew with her eyes closed. If you don't use it for a long time or for a long time, you can clean it with warm water again, if the grinding core is

Metal cannot be washed with water.

The hand grinder can adjust the grinding thickness according to the blister mode.

1. Remove the nut, handle, and pin piece (L-shaped retainer) in order

2. Lift the central shaft core with one hand, adjust the adjusting piece with the other hand, and adjust it in the direction of the clock (please keep the 0.3MM spacing, be careful not to spin too tightly, so as not to damage the internal structure of the machine parts) the reverse clock adjustment is coarse.

3. Put back the lock piece (L retainer), the long handle end of the lock piece clamps the gear on any adjusting piece, and then install the handle and nut back.

Before using the bean grinder, we need to adjust to the appropriate thickness according to the different coffee pots we use.

1. Now unscrew the top screw.

2. Remove each nut in turn.

3. The bottom nut is to adjust the thickness. (thick up, thin down)

4. Adjust the required thickness.

5. Install the nuts in turn.