Delong coffee machine grinding thickness-numerical introduction of coffee machine grinding thickness

Delong coffee machine grinding thickness-numerical introduction of coffee machine grinding thickness

Simple judgement of Grinding thickness of Coffee Powder

If the coffee liquid is light and the pressed powder is not shaped, it is loose and damp, and the powder is too coarse.

If the coffee liquid is very black, dripping, not in a straight line, and there is little liquid coming out for a long time, the powder is too fine.

Normally, at first, the coffee liquid is very strong, the liquid is in a straight line, and slowly fades. Pressed powder molding is not loose and not damp for a long time without a coffee machine, you need to press the new machine again for the first time, first put steam, and then can operate normally, this will make the remaining water in the coffee machine for too long to discharge the body coffee cinder box indicator is always on.

Delong 2000, Delong 3000, Delong 3200, Delong 4000, Delong 4200 coffee machine series

At the bottom, the second light is always on from the left. You should take out the coffee residue box and clean it up when you turn it on. If you operate in the off state, the light will not go out and the machine will not work.

one。 After making a cup of coffee, whether the flow rate of the coffee is too fast or too slow, the thickness of the coffee can be adjusted by the knob of the "S" coffee grinding thickness regulator. The knob is located in the coffee bean storage tank. When you rotate a digital amount clockwise, the flow rate of coffee will speed up a little bit, and when you rotate the knob counterclockwise by one scale, the flow rate of coffee will slow down. At the same time, the flow of coffee juice will also change.

two。 These adjustments must be made after making two cups of coffee, and must be adjusted according to the actual needs of the user.