Coffee review

Video introduction to the operation steps of semi-automatic coffee machine

Published: 2024-09-20 Author: World Gafei
Last Updated: 2024/09/20, The operation procedure of the semi-automatic coffee machine is illustrated in the video introduction. 1. Change the power switch of the coffee machine to the heating gear every morning to heat the coffee machine. Make sure the power indicator is on and hang the two filter handles on the coffee faucet of the machine. 2. Pour the coffee beans into the bean bowl of the bean grinder and pour out only the amount of beans needed for that day. Re-seal the remaining coffee beans and put them in a dry

Semi-automatic coffee machine use method operation steps diagram video introduction

1. Turn the coffee machine power switch to the heating position every morning to heat the coffee machine. Make sure the power indicator light is on and hang the two filter handles on the coffee tap of the machine.

2. Pour the coffee beans into the bean grinder jar and pour only the amount of beans needed for the day. reseal remaining coffee beans and store in a dry room temperature.

After about fifteen minutes, the pressure gauge on the coffee machine reaches the set position, indicating that the machine has been heated and can be used.

4, to ensure that high-quality coffee drinks can be made, before making coffee, open the coffee switch to release about 5 ounces of water from each of the two taps, and release some steam and hot water from the steam pipe and hot water pipe on both sides, so that the coffee machine is fully heated for another ten minutes.

5, turn on the power of the grinder to grind coffee beans, do not grind too much powder in advance, so as not to lose the flavor of coffee powder.

6. Hold the filter handle with your left hand and turn left to remove the handle. Insert the handle under the bean grinder. Pull the powder puller handle with your right hand.

7. Tap the edge of the filter gently with the small end of the hand-held powder press to flatten the powder, and then press the powder vertically downward at one end of the big head. Then tap the edge of the filter with the small end and compact the powder a second time with the big end.

8, wipe off the residual powder on the edge of the filter with your hand, first open the coffee switch to release hot water for 3 seconds, and then hang the handle on the machine faucet to the right and lock it.

9. Take the coffee cup from the warm cup plate on the upper part of the machine and put it under the water outlet of the faucet. Press the corresponding coffee button on the panel.

10

10. After the coffee is ready, turn the handle to knock the coffee grounds into the residue bucket, wipe the filter clean with a brush or clean cloth, and gently button the handle on the faucet to preheat and keep warm.

0