How to disassemble and wash coffee machine sprinkler step tutorial video introduction

How to disassemble and wash coffee machine sprinkler step tutorial video introduction

1. Remove the filter plate, rinse it with clean water, and then wipe it dry. (do not clean with sharp or hard cleaning utensils)

two。 Wipe the whole outside of the coffee machine with a wet towel. Do not leave any stains. (especially the baffle behind the brewing head.) Wipe it with a dry towel until there are no water stains.

3. Take two cups of hot water and soak part of the steam rod nozzle.

Cleaning and maintenance of semi-automatic coffee machine:

1. Coffee machine body cleaning:

Wipe the fuselage with a wet rag before starting up every day. If you need to use a cleaner, please choose a mild and non-corrosive cleaner to spray it on the wet rag and then wipe the fuselage (note that the rag should not be too wet, and cleaning should not be sprayed directly on the fuselage, to prevent excess water and detergent from seeping into the circuit system and eroding wires to cause short circuit).

2. Cleaning the outlet of the cooking head:

After each production, remove the handle and press the cleaning button to wash down the coffee grounds left in the cooking head and on the strainer. Then insert the handle into the seat (note: do not hold the handle tight at this time) press the cleaning button and shake the handle left and right to wash the cooking head washer and coffee grounds on the inside of the cooking head.

3. Steam rods:

After using a steam stick to make foam, use a clean wet dishcloth (McEffin Coffee reminder: do not use coarse cloth! If the milk stain on the steam sprinkler has formed a hard lump, it can be soaked in water dissolving cleaning tablets for a period of time, then wipe it with a soft wet cloth) wipe and turn on the steam switch again, making use of the impulse and high temperature emitted by the steam itself. automatically clean the residual milk dirt in the vent to maintain the smooth flow of the vent If there is residual milk crystallization on the steam rod, soak the steam rod in a steel cup filled with 8% hot water to soften the crystallization in the jet hole and on the steam rod, remove the steel cup after 20 minutes, and repeat the operation in the first paragraph above.

4. Boiler:

In order to prolong the service life of the boiler, if the machine is not used for a long time, please turn off the power supply and turn on the steam switch to completely release the pressure in the boiler until the boiler pressure gauge indicates zero. Clean the water tray and drainage tank after the steam is no longer ejected (note: do not turn off the steam switch at this time

1. Coffee machine body cleaning:

Wipe the fuselage with a wet rag before starting up every day. If you need to use a cleaner, please choose a mild and non-corrosive cleaner to spray it on the wet rag and then wipe the fuselage (note that the rag should not be too wet, and cleaning should not be sprayed directly on the fuselage, to prevent excess water and detergent from seeping into the circuit system and eroding wires to cause short circuit).

2. Cleaning the outlet of the cooking head:

After each production, remove the handle and press the cleaning button to wash down the coffee grounds left in the cooking head and on the strainer. Then insert the handle into the seat (note: do not hold the handle tight at this time) press the cleaning button and shake the handle left and right to wash the cooking head washer and coffee grounds on the inside of the cooking head.

3. Steam rods:

After using a steam stick to make foam, use a clean wet dishcloth (McEffin Coffee reminder: do not use coarse cloth! If the milk stain on the steam sprinkler has formed a hard lump, it can be soaked in water dissolving cleaning tablets for a period of time, then wipe it with a soft wet cloth) wipe and turn on the steam switch again, making use of the impulse and high temperature emitted by the steam itself. automatically clean the residual milk dirt in the vent to maintain the smooth flow of the vent If there is residual milk crystallization on the steam rod, soak the steam rod in a steel cup filled with 8% hot water to soften the crystallization in the jet hole and on the steam rod, remove the steel cup after 20 minutes, and repeat the operation in the first paragraph above.