Coffee review

How to clean expobar coffee machine-how to use semi-automatic coffee machine

Published: 2024-09-19 Author: World Gafei
Last Updated: 2024/09/19, Expobar coffee machine how to clean-semi-automatic coffee machine performance features: 1 the use of PID technology, accurate control of coffee production temperature to meet the demanding requirements of enthusiasts; 2 professional brewing head E61, weighing 4.2 kg; the boiler is copper; the machine shell is made of 2mm thick stainless steel; 3 pairs of boiler configuration, one for brewing coffee, one for steam and hot water

How to clean expobar coffee machine-how to use semi-automatic coffee machine

Performance characteristics:

1 using PID technology to accurately control the temperature of coffee making to meet the stringent requirements of enthusiasts

2 professional brewing head E61, weighing 4.2 kg; the boiler is made of copper; the machine shell is made of 2mm thick stainless steel

3 double boilers, one for brewing coffee and one for steam and hot water

4 with barometer and water pressure gauge, liquid crystal panel on the left to display and adjust the required temperature

(5) directly connect the external water source. (this paragraph is excerpted from X Bao)

Ps: Aibao is a Spanish brand, but it is processed domestically and is a fake import.

Ladies and gentlemen, the bedding in front is a little long, let's talk less, and immediately uncover the true face of this protagonist.

The cleaning of the coffee residue from the brewing head can separate the filter net and the copper block on the brewing head. The filter net is the part that comes into direct contact with the coffee powder every time the coffee is brewed. Because the coffee powder is pressed, the coffee liquid will flow out of the powder bowl only when it is pressed to a certain extent, so the coffee liquid may flow back before it seeps out, and some coffee residues may still be in the filter. If it is not cleaned for a long time, it may affect the taste of the coffee and it is also very unhygienic. After cleaning the copper, you can release water, because after backflushing, you may leave some powder in the pipe of the coffee machine, which is edible, but it is better to put it clean.

The last step is to bubble all the parts that can be removed in the powder solution, including filter net, copper block, handle, powder bowl, steam pipe head, and so on. The second is the cleaning of the sink, the cleaning of the sink with clean water can also be added to the special cleaning agent. As for the recoil in the first brief introduction, the so-called recoil is the use of the pressure generated by the coffee machine itself, combined with cleaning powder to clean the waterway of coffee. A blind bowl can be used for recoil, that is, a filter bowl with no eye-catching handle. Plug the eye punch of a single powder bowl, then put the powder in the bowl, and then put the hand back into the coffee machine. Because it is a blind bowl, the water will not flow out, and the hot water will dissolve the powder. Because the pressure water will flow back into the pipeline, the powder will backwash and clean the pipeline. Generally pressurized for about 7 seconds, stop pressurization, due to pressurization, water will be ejected from the pressure relief valve, and may even be spilled from the drip tank below, so it is recommended that you cover it with a layer of towel to prevent water from splashing out. In this way, the switch exerts pressure to go back and forth for about 10 times, which basically achieves the purpose of cleaning the pipeline, and the handle can be taken off now.

0