How to install and use calibration of manual coffee grinder

How to install and use calibration of manual coffee grinder

1. When using the bean grinder, do not grind too much at one time, just enough for one time. The longer the bean grinder is used at a time, the easier it is to get hot, which indirectly causes the aroma of coffee beans to be released ahead of schedule due to heating in the process of grinding. It will affect the aroma of the coffee after cooking.

2. In the process of grinding, do not grind continuously for a long time, so that the grinding core does not produce friction heat as far as possible. If the grinding time is too long and the heat generated is too much, it is very likely that the parts of the bean grinder will be damaged, or the short failure of the bean grinder will occur, so it is necessary to grasp the grinding time of coffee beans.

3. After each use, the drawer outside the bean grinder can be wiped with a wet cloth, and the movement does not need to be cleaned. Use a special bean grinder brush to clean it. If you don't use it for a long time, just pour out the coffee powder in front of it the next time you use it.

Because of its grinding disc characteristics, it is easy to grind unevenly.

It is easier to produce a large amount of heat, which aggravates the loss of coffee aroma, which also leads to the easy emission of coffee gas when the hand grinder is grinding.

The efficiency is too low, believe it or not, China Coffee Network believes anyway. This is the biggest problem for China Coffee Network. If I want to make a cup of coffee, if I use 20 grams of coffee beans to grind, the grinding time can be as long as 5 minutes. When shaking, your hands will still get sore. Of course, if you take this as a way of exercise, the hand grinder is quite suitable for you.

The wood base is easy to break, and the grinding plate on the hand bean grinder is fixed on the wood base with screws. After using it for a long time, the hole in the screw will become bigger and bigger, so that the bean grinder can not be used. The solution is to remove the grinding part of the hand bean grinder, and then screw the screw to the base in another place.