Coffee washing method step taste and flavor description grinding scale method manor characteristics

Coffee washing method step taste and flavor description grinding scale method manor characteristics

The advantage of washing treatment is that it goes through many steps of screening and cleaning, so the appearance and taste of coffee beans will be cleaner and uniform. And the washing method removes the pulp at the beginning, so you don't have to worry about mildew like the sun method later.

The disadvantage of washing treatment is as obvious as its name, that is, it requires a lot of water, which is not feasible in countries that lack water resources, and the process of washing is more complicated, and the cost is much higher than that of solarization.

1. Choose beans:

Put the harvested fruit in a water tank and soak for about 24 hours. At this time, ripe fruit will sink, while immature and overripe fruit will float up and can be removed.

two。 Remove the pulp:

Use a machine to remove the peel and pulp, leaving only coffee beans wrapped in endocarp. At this time, there is a layer of mucous membrane on the outside of the beans, and the process of washing is to wash this layer of mucous membrane.

3. Hair alcohol:

The adhesion of the mucous membrane is very strong and is not easy to remove. It must be placed in the slot for about 18-36 hours to make it alcohol and decompose the mucous membrane. There are two methods of fermentation, namely wet hair alcohol and dry hair alcohol, as the name implies, the former adds water, the latter does not add water. In the process of producing alcohol, the seeds and internal pulp will produce special changes, which is one of the steps that most affect the flavor of coffee. Some farms add hot water or alkanolins to speed up the production of alcohol, which has a negative impact on the quality of coffee beans and is not popular with selected coffee lovers.

4. Washing:

Farms that use the washing method must build washing ponds and be able to introduce an endless supply of running water. During the treatment, the finished beans are put into the pool and passed back and forth, using the friction of beans and the power of running water to wash the coffee beans until smooth and clean.

5. Dry:

After washing, at this time, the coffee beans are still wrapped in the pericarp with a moisture content of 50%. They must be dried to reduce the moisture content to 12%, otherwise they will continue to be mellow, moldy and rotten. The better treatment is to use sunlight to dry, although it will take 1-3 weeks, but the flavor is very good and very popular. In addition, machine drying is used in some places, which greatly shortens the processing time and makes the flavor not as good as that of sun-dried coffee.

6. Shelling:

The dried beans can be stored in a warehouse or handed over to the factory for shelling to remove endocarp and silver film.

7. Selection and grading:

Like tanning hair, washed coffee has a process of picking and grading, which is used to remove defective beans and ensure better quality, which is then handed over to exporters to sell around the world.