Usage of hand bean mill-introduction to the brand of thickness adjustment of hario hand bean mill

Usage of hand bean mill-introduction to the brand of thickness adjustment of hario hand bean mill

Electric grinder has sawtooth type and rotary wing type. The sawtooth electric grinder grinds the coffee into an appropriate thickness and then puts it in a basket, and is equipped with thick and thin buttons, which can automatically set the size. Most of these electric grinders are expensive products.

The electric grinder mainly used in ordinary bulk is the mini rotary wing grinder, which is very similar to the bean mixer for grinding dietary beans. Since there is no device to adjust the size of the rotor electric grinder, if you want to grind to the desired thickness, it can be adjusted by time.

In particular, if you want to use a rotary wing electric grinder to grind uniform coffee particles, shaking the grinder up and down is the key point! It is important to grind the coffee to the desired size while confirming the process and appearance of the grinding, but if you are proficient to a certain degree, you can tell the thickness of the particles by the sound you make when shaking. It's not that sound, and it's not this voice. It may sound like advertising copywriting, but in fact, the finer the particles, the lighter the sound.

1. Applicable scenario

Hand flushing, siphon kettle, pressure kettle and similar brewing methods at home are recommended to use a hand grinder. It is not recommended to use espresso if it is made.

2 selection of grinding core

The movement of the hand bean grinder is divided into metal and ceramic. The metal will heat when grinding, making the aroma of coffee beans volatilize ahead of time; the ceramic is fragile, but the ceramic is basically not hot, so the aroma is corrected.

3 Brand introduction

Many people are using the sloshing A12 affordable, Kyocera, HARIO and TIAMO are also good, HARIO shanzhai Kyocera, TIAMO copycat HARIO. The grinding core of HARIO is manufactured by Kyocera, the brand of TIAMO is made in Taiwan, almost all of it is made in the mainland, and the plastic of TIAMO may not be safe. The grinding core of Kyocera CM45 can grind the powder needed by espresso, and I think it is better to grind espresso powder with special electric mill (not the best hand mill, such as HG-ONE).

4 using skills

Hand grinder gives everyone the impression that it is very tired to grind. At present, coffee beans are more popular in the domestic market for medium and deep roasting, and beans are still easy to grind. You can try to sit on the stool, clip the bean grinder on your knee, and then start grinding. I usually use this method, which is very easy to say, and you don't have to press down hard.

5 Clean

After each use, try to clean the residual powder in the grinding core, bean warehouse, powder cartridge and powder cartridge. When it is not clean, you can blow it in the dishwashing pool with your eyes closed. If it is not used for a long time or for a long time, it can be cleaned with warm water again. If the grinding core is metal, it cannot be washed with water.